HGE-L1 Non-Contact Hygiene Barrier with Sink and BGM Box
It enables contactless hand washing and access through the turnstile, which opens with the dispensing of sanitizer to both hands.
All made of 304-grade stainless steel material. It has a matte appearance. Exit is made through a separate turnstile, but it is also suitable for passage in both directions if desired. It is equipped with adjustable height legs. The base plate is 2mm thick, the side plate is 1.2mm thick, and it has a 40x40mm profile construction.
Hand Wash Station :It is made of stainless steel and equipped with a sensor. There is no need for direct contact with the sink; it automatically activates when approached. It comes with a stainless steel and sensor-equipped liquid soap dispenser with a 5L liquid soap container.
Hand Drying Station : It consists of a 400-sheet multi-fold paper towel dispenser and a trash bin.
Bone / Overshoes / Mask / Trash Bin : The upper part consists of a cap, overshoes, mask bin; the lower part consists of an apron bin.
Floor Disinfection Pool : Connected to the cold water line, containing a mixture of disinfectant and water.
With grating. 1/2''' water filling and 3/4'' water drain connection.
Dehumidifier Mat : Designed to absorb excess moisture on exit, it has a curly texture.
Double Hand Disinfection Device and Tourniquet System: Works automatically. Disinfectant for both hands
hand sanitizer transmitter (spray) with double chamber and double sensor for uptake and
It has a three-arm electric turnstile system that provides access when disinfectant is taken.
Water supply: Recommended pressure: 3 bar. Maximum temperature: 50°C. Water flow rate: 7 l/min.
Electric supply: 230V, 50Hz with power plug.
Measurements : 180cm (length) x 100cm (width) x 150cm (height)
